3Com Corporation WL311 Manual De Usuario
LED Indicators
7
LED Indicators
The 3Com Wireless Building-to-Building Bridge has five LED indicators, as shown in the
figure below.
figure below.
The LED indicators are described in the table below:
Bridge Placement Considerations
Indoor Location
Place the wireless bridge in a location that:
■
Is conveniently located for connection to the Ethernet network.
■
Allows easy viewing of the front panel LED indicators, and access to the rear panel
connectors, if necessary.
connectors, if necessary.
Outdoor Location
It may be necessary to mount the wireless bridge in an outdoor location. If you place the
bridge in an outdoor location, you should cover it with an optional outdoor enclosure
accessory. To obtain an outdoor enclosure accessory, contact 3Com at http://www.3com.com.
For installation instructions, refer to the procedure provided with the enclosure accessory.
bridge in an outdoor location, you should cover it with an optional outdoor enclosure
accessory. To obtain an outdoor enclosure accessory, contact 3Com at http://www.3com.com.
For installation instructions, refer to the procedure provided with the enclosure accessory.
LED
Lights
Power
Green when power is applied.
Alert
Amber when status information is available. View the event log for status information.
(See “Event Log” on page 33 for more information.)
(See “Event Log” on page 33 for more information.)
Wireless
Green when the bridge is associated with another bridge and lights amber during radio
communication.
communication.
Ethernet
Green to show that a valid Ethernet link is present through the 10BASE-T port. Lights
amber during Ethernet activity.
amber during Ethernet activity.
Serial
Green when receiving data through the serial port and lights amber when transmitting
data through the serial port.
data through the serial port.
Wireless
Building-to-Building
Bridge
Building-to-Building
Bridge
Power
Alert
Wireless
Ethernet
Serial