Sennheiser Electronic Corp SDCW9000AP Manual De Usuario
DE
EN
FR
IT
ES
NL
Configuring the conference system
62
WiCOS ehemals SDCw 9000 | Korrekturexemplar 10 | 03.03.09
The information on the conference units is not automatically refreshed.
To refresh the information:
왘
Click “
Refresh Unit Table
”,
The information is refreshed.
To clearly identify the conference units initialized with the system:
왘
Click “
Test LEDs ON
”.
The indicators and displays of the initialized conference units light up.
To switch the test mode off:
왘
Click “
Test LEDs OFF
”.
The indicators and displays of the initialized conference units go off.
Initializing the conference units with the access point – “Init Units“
There are two ways to initialize the conference units with the access point:
•
automatic initialization – “
Open access
“
•
manual initialization – “
Manual
” (recommended when operating
several WiCOS conference systems simultaneously and/or conference
systems with encryption)
systems with encryption)
왘
In the main navigation, click “
Conference management
” > “
Init units
”.
The “
Init units
” overview screen appears.
“
Status
“
Connection status between access point and
conference units:
conference units:
• “
Connected
“
• “
Disconnected
“
“
Link Quality
“
Link quality between access point and conference
units:
units:
• “
Excellent
“
• “
Good
“
• “
Fair
“
• “
Low
“
“
Battery Status
“
Remaining operating time in hours
Information
Function/Meaning