Sennheiser Electronic Corp SDCW9000AP Manual De Usuario
DE
EN
FR
IT
ES
NL
WiCOS ehemals SDCw 9000 | Korrekturexemplar 10 | 03.03.09
63
Configuring the conference system
The following information is displayed:
To
automatically initialize
all conference units within the transmission
range of the access point:
왘
In the “
Init Control
” box, select the “
Open Access
” option button.
If you switch on a conference unit that is within the transmission range
of the access point, the conference unit is automatically integrated into
the conferences system. This conference unit is listed under “
of the access point, the conference unit is automatically integrated into
the conferences system. This conference unit is listed under “
Units
Initialized
” and “
Unit monitoring
”.
To
manually initialize
certain conference units with the access point:
왘
Switch on all conference units that you want to use in your conference
system (see page 31).
system (see page 31).
왘
In the “
Init Control
” box, select the “
Manual
” option button.
왘
Click “
Clear Init List
”.
The existing “
Units in Init List
” list will be deleted (where applies).
왘
Click “
Start init
”.
Information
Function/Meaning
“
Units initialized
“
Number of conference units that are initialized with the
access point and currently switched on
access point and currently switched on
“
Units in Init List
“
Number of conference units that are manually initialized
with the access point
with the access point
CAUTION!
Intermodulations in conferences!
If you operate several conference systems simultaneously in
“
“
Open Access
” mode, this will cause intermodulations as the
conference units will communicate with different access
points.
points.
왘
Initialize the conference units manually (see next section).