Checkpoint Systems Inc. EVOLVES10 Manual De Usuario

Chapter 2 – SocketModem (MT5600SMI & MT5656SMI) 

Multi-Tech Systems, Inc. Universal Socket Hardware Guide for Developers (S000342D) 

63 

 

Disclaimer: Multi-Tech Systems makes no warranty claims for vendor product recommendations listed 
below. Other vendor products may or may not operate satisfactorily. Multi-Tech System’s recommended 
vendor products only indicate that the product has been tested in controlled conditions and were found to 
perform satisfactorily. 

Surface mount ferrites are used on T&R (Tip and Ring) to mitigate emission levels out the RJ-11 cable. 220pF 
capacitors are also used on T&R to reduce the common mode emissions that may be present in certain systems. 
The ferrite and capacitors also aid in reducing the effects of transients that may be present on the line.    

Manufacturer – Associated Component Technology (ACT) – Part # - YCB-1206   
Manufacturer – Murata Erie – Part # - BLM31AJ601SN1 

Manufacturer – Associated Component Technology (ACT) – Part # - WB2-2.OT 

Manufacturer – NOVACAP –   Part # - ES2211NKES502NXT 
Manufacturer – Murata Erie –   Part # - GA355DR7GC221KY02L (Surface mount device)  

Part # - DE0807B221K-KH (Thru-hole device) 

Manufacturer – Ever Grace Electronic Industrials -- Part # - YP221K2EA7PS 

 The capacitors used on T&R must have the Y2 safety rating. 

Manufacturer – Stewart – Part # - SS-6446-NF-A431 

Manufacturer – RayChem – Part # - TS600-170 

 This fuse or its equivalent is required to meet UL60950 for protection against over-voltage from power 

line crosses. 

The RJ-11 connector must meet FCC Part 68 requirements. Refer to FCC Part 68 section 68.500 subpart F 
for connector specifications. A self-healing fuse is used in series with line to help prevent damage to the 
DAA circuit. This fuse is needed for FCC Part 68 compliance. 

 

Manufacturer – TDK – Part # - ZJYS51R5-2PT 

Manufacturer – Teccor Electronics – Part # - P#3100SA 
Manufacturer – ST Microelectronics -- Part 1 – SMP100LC-270 

Manufacturer – Analog Devices – Part # - ADM207EAR 

Manufacturer – Specialty Electronics (www.connectorsolutions.com) 
 

 4-Pin 2.0mm SIP Socket (2 Each) 

 

10-Pin 2.0mm SIP Socket (2 Each)