Checkpoint Systems Inc. FISOLRR Manual De Usuario
1-14
I L S O p e n P l u s 3 . 0 I n s t a l l a t i o n M a n u a l
Install the Antenna Body
Once the floor plate is bolted to the floor, you then attach the antenna base to the floor
plate.
plate.
Figure 1.12
Antenna body attachment
1
Insert the antenna body on to the antenna base and screw it to the antenna base using
the mounting bolts as shown above.
the mounting bolts as shown above.
2
Use the adjusting screws (see above) to ensure the gate is plum.
Figure 1.13
Attaching the upper frame section with LED annunciator
3
Connect the top molding:
a
For the master gate, place the upper molding section with the LED annunciator on
the antenna body and use the mounting bolts to fasten it loosely as shown above.
The annunciator connection cable for the LED is already routed in the antenna
body.
the antenna body and use the mounting bolts to fasten it loosely as shown above.
The annunciator connection cable for the LED is already routed in the antenna
body.
b
For the slave gate, place the upper molding section on the antenna body and use the
mounting bolts to fasten it loosely as shown above.
mounting bolts to fasten it loosely as shown above.
Antenna shown partially
inserted into base.
inserted into base.
Nut and washer for screw
(not seen) attaches here.
(not seen) attaches here.
Use the adjusting screws
to plum the gate.
to plum the gate.
Light bar
Mounting bolt here