Checkpoint Systems Inc. FISOLRR Manual De Usuario
I L S O p e n P l u s E x i t A n t e n n a I n s t a l l a t i o n : I n s t a l l t h e A n t e n n a B o d y
1-15
4
Connect the Alarm Kit components as described in
Cable Routing Guideline
The cables should be routed as compactly as possible regardless of the antenna
configuration. The cables should be tied into small loops at the end by binding all cables
as far from the antenna conductor as possible. The cables must never be allowed to contact
the copper tube. The antenna cables have a fixed length of approximately 2.10 m or 3.60
m (6.9 ft or 11.8 ft) and may not be shortened.
configuration. The cables should be tied into small loops at the end by binding all cables
as far from the antenna conductor as possible. The cables must never be allowed to contact
the copper tube. The antenna cables have a fixed length of approximately 2.10 m or 3.60
m (6.9 ft or 11.8 ft) and may not be shortened.
Figure 1.14
Cable Wrapping in Antenna Base
The above picture shows a correct cable routing.
Cables are dogbone wrapped and routed along the bottom