Checkpoint Systems Inc. FX2012 Manual De Usuario
NGL FX Installation Manual
Rev. *
48 of 84
9. Navigate to the Antenna Settings window.
10. Under each Antenna Tab, fill in the following parameters:
•
Antenna Type
: Set to PAB-SAB.
•
Jammer Threshold
: Set to 0.
•
TX Maximum
: Set to 31.
•
RX Gain
: Set to 31.
•
RX Hardware Gain
: Set to 31.
•
Port Control
: Check RX, TX and Port. Do not check AGC.
11. Click on Apply. Figure 29X*** shows the Antenna Settings for NGL.
Figure 27X*** Antenna Settings
Multi-Aisle Setup – FX Systems operating in Sync***
The difference between a multi-aisle system and a single-aisle system is that the multi-aisle system
has one aisle designated the "master system" and all other aisles are designated the "submaster
system". When a Multi-Aisle System is used, and extra step is necessary to configure the NGL
Master/Submaster designation. Figures ***28 and 29 illustrate the difference between a Single-
Aisle and a Multi-Aisle System. A Multi-Aisle System makes use of a Sync cable between the
PAB antennas for each aisle. The Master PAB provide the "Sync" signal to the Submaster PAB(s).
has one aisle designated the "master system" and all other aisles are designated the "submaster
system". When a Multi-Aisle System is used, and extra step is necessary to configure the NGL
Master/Submaster designation. Figures ***28 and 29 illustrate the difference between a Single-
Aisle and a Multi-Aisle System. A Multi-Aisle System makes use of a Sync cable between the
PAB antennas for each aisle. The Master PAB provide the "Sync" signal to the Submaster PAB(s).