Mindray DS USA Inc. WT0707-00000 Manual De Usuario
Panorama™ Operating Instructions
0070-10-0690-01
5 - 55
Patient Setup Functions
Print Setup Tab (Patient)
5.7
Print Setup Tab (Patient)
The Print Setup tab (shown in FIGURE 5-35) is used to select the waveforms that will be
printed when an All Strips, Event Zoom-In, or Full Disclosure Zoom-In report is generated for
the selected patient tile. The waveforms included in this tab will change based on the
parameters in use and the type of monitoring device that is assigned to the selected patient
tile. The default settings for the waveform portion of the Print Setup tab are defined by the
system Print Setup tab, which is described in the “Print Setup Tab (System)” on page 9-45.
printed when an All Strips, Event Zoom-In, or Full Disclosure Zoom-In report is generated for
the selected patient tile. The waveforms included in this tab will change based on the
parameters in use and the type of monitoring device that is assigned to the selected patient
tile. The default settings for the waveform portion of the Print Setup tab are defined by the
system Print Setup tab, which is described in the “Print Setup Tab (System)” on page 9-45.
The Print Setup tab is available at the ViewStation and the WorkStation, and functions in
the same manner as it does at the host central station. When a patient tile is assigned at the
ViewStation or the WorkStation, it will initially display the print setup configuration settings of
the associated host central station patient tile, provided the patient tile is communicating with
the central station.
the same manner as it does at the host central station. When a patient tile is assigned at the
ViewStation or the WorkStation, it will initially display the print setup configuration settings of
the associated host central station patient tile, provided the patient tile is communicating with
the central station.
After this initial transfer, changes made to the host central station, the ViewStation and/or the
WorkStation patient tile Print Setup tab will be independent of each other unless
communication is interrupted. Automatic updating of the print setup configuration settings at
the remote workstation patient tile will occur if any of the following occur:
WorkStation patient tile Print Setup tab will be independent of each other unless
communication is interrupted. Automatic updating of the print setup configuration settings at
the remote workstation patient tile will occur if any of the following occur:
• The monitoring device is placed in the Standby mode at the central station
• The monitoring device is not communicating with its host central station (Communications
Lost)
• Communication between the host central station and the ViewStation and/or the
WorkStation is lost (Central Communications Lost)
5.7.1
Accessing the Print Setup Tab
1. From the menu bar, select the Patient Setup menu button. The tabs associated with
patient setup are displayed.
2. Choose a patient tile by selecting its digital tile or waveform area.
3. Select the Print Setup tab. The Print Setup tab is enabled.
FIGURE 5-35 Patient Print Setup Tab (Central Station)