Mindray DS USA Inc. WT0707-00000 Manual De Usuario
Panorama™ Operating Instructions
0070-10-0690-01
9 - 45
System Setup Functions
Print Setup Tab (System)
9.12
Print Setup Tab (System)
The Print Setup tab (shown in FIGURE 9-34 and FIGURE 9-35) defines the printer(s) that
will be used to print standard (defined as reports that do not contain waveforms) and strip
reports (such as the All Strips, Event Zoom-In, and Full Disclosure Zoom-In Reports). This tab is
available at the ViewStation and WorkStation, and it functions in the same manner as the
host central station. The central station and each remote workstation is capable of
communicating with two network printers simultaneously.
will be used to print standard (defined as reports that do not contain waveforms) and strip
reports (such as the All Strips, Event Zoom-In, and Full Disclosure Zoom-In Reports). This tab is
available at the ViewStation and WorkStation, and it functions in the same manner as the
host central station. The central station and each remote workstation is capable of
communicating with two network printers simultaneously.
Print Setup tab changes made at the central station or remote workstations are
independent of each other.
independent of each other.
NOTE:
The network printer(s) must be properly configured to
communicate with the central station.
communicate with the central station.
For information regarding individual patient print setup configuration, refer to “Print Setup
Tab (Patient)” on page 5-55.
Tab (Patient)” on page 5-55.
For information regarding printer configuration, refer to the Panorama Printer Configuration
Guide (P/N 0070-00-0561).
Guide (P/N 0070-00-0561).
9.12.1
Accessing the Print Setup Tab (Central Station)
1. From the menu bar, select the System Setup button.
2. Select the Print Setup tab. The Print Setup tab is displayed.
FIGURE 9-34 System Print Setup Tab (Central Station)