Mindray DS USA Inc. WT0707-00000 Manual De Usuario
Panorama™ Operating Instructions
0070-10-0690-01
1 - 9
System Overview
Supported Devices
1.3.8
Spectrum
™
Bedside Monitor
Spectrum bedside monitors are used to monitor patient data and may use either a hardwired
or a wireless (2.4 GHz or 608 MHz) configuration. Currently, the Spectrum sends data to the
Panorama Central Station for viewing and storage via an Ethernet connection. The data
collected by a Spectrum is dependent on the type of lead wire set and sensors used. If an
alarm in the following table does not have an associated footnote, it may occur using any
lead wire set.
or a wireless (2.4 GHz or 608 MHz) configuration. Currently, the Spectrum sends data to the
Panorama Central Station for viewing and storage via an Ethernet connection. The data
collected by a Spectrum is dependent on the type of lead wire set and sensors used. If an
alarm in the following table does not have an associated footnote, it may occur using any
lead wire set.
NOTE:
The CO/CI, Temp 2, and T Blood parameters are only
available if they are being monitored by the Spectrum/
Spectrum OR External Parameter Module (EPM). These
parameters are not available if they are monitored by an
Edwards Vigilance
available if they are being monitored by the Spectrum/
Spectrum OR External Parameter Module (EPM). These
parameters are not available if they are monitored by an
Edwards Vigilance
®
monitor.
Parameters/Waveforms
PARAMETERS
SETTINGS
PANORAMA ALARMS
ECG/Heart Rate
Leads I, II, III are available with a 3-wire
lead set.
lead set.
Low Heart Rate
High Heart Rate
High Heart Rate
Leads I, II, III, aVR, aVL, aVF, V are
available with a 5-wire lead set.
available with a 5-wire lead set.
Leads I, II, III, aVR, aVL, aVF, V1, V2,
V3, V4, V5, V6 are available with a
View 12
V3, V4, V5, V6 are available with a
View 12
™
card.
ST
ST analysis is in use at the bedside
device.
device.
ST Single
ST Dual
ST Dual
PVC/min.
Arrhythmia analysis is in use at the
bedside device.
bedside device.
Asystole
Bigeminy
Brady
Bigeminy
Brady
2
Couplet
Irregular Heart Rate
Irregular Heart Rate
2
Pause
1
High PVC
Run
Trigeminy
V-Fib
V-Rhythm
V-Tach
Run
Trigeminy
V-Fib
V-Rhythm
V-Tach
Respiration (Source:
ECG, CO
ECG, CO
2
and Gas
3
Module)
Respiration is in use at the bedside and
is derived from a valid source.
is derived from a valid source.
Low Respiration
High Respiration
Apnea
High Respiration
Apnea
SpO
2
SpO
2
sensor is in use at the bedside
device.
Low SpO
2
High SpO
2
IBP1/IBP2/IBP3/IBP4
(Systolic, Diastolic,
Mean)
(Systolic, Diastolic,
Mean)
IBPx option is in use at the bedside
device.
IBP parameter labels include IBP, Art,
UA, LV, PA, CVP, ICP, LA and RA. The
label used is based on the label selected
at the bedside monitor.
device.
IBP parameter labels include IBP, Art,
UA, LV, PA, CVP, ICP, LA and RA. The
label used is based on the label selected
at the bedside monitor.
Low IBPx Systolic
High IBPx Systolic
Low IBPx Diastolic
High IBPx Diastolic
Low IBPx Mean
High IBPx Mean
High IBPx Systolic
Low IBPx Diastolic
High IBPx Diastolic
Low IBPx Mean
High IBPx Mean
NOTE:
x = 1, 2, 3 or 4 (IBP3 and 4 are only available if the
Spectrum/Spectrum OR External Parameter Module
(EPM) is installed)
Spectrum/Spectrum OR External Parameter Module
(EPM) is installed)
1
Alarm will only be detected when using a View 12
™
card.
2
Alarm will not be detected when using a View 12
™
card.
3
Waveform not supported when using a WMTS 608 bedside device.