Mindray DS USA Inc. WT0707-00000 Manual De Usuario
Panorama™ Operating Instructions
0070-10-0690-01
9 - 65
System Setup Functions
Wireless Tab
Software Version
The Software Version field displays the version of software currently in use by the wireless
device. Data is shown in the Software Version field when the Wireless tab’s Read sidebar
button is selected. The factory default setting is blank. If the read was not successful, an error
message will be displayed and the Software Version field will remain blank. To view the
connection status of the wireless device check the message in the Connect field.
device. Data is shown in the Software Version field when the Wireless tab’s Read sidebar
button is selected. The factory default setting is blank. If the read was not successful, an error
message will be displayed and the Software Version field will remain blank. To view the
connection status of the wireless device check the message in the Connect field.
Hardware Version
The Hardware Version field displays the version of hardware in use by the connected
device. Data is shown in the Hardware Version field when the Wireless tab’s Read sidebar
button is selected and has a factory default setting of blank. If the read was not successful, an
error message will be displayed and the Hardware Version field will remain blank. To view
the connection status of the wireless device check the message in the Connect field.
device. Data is shown in the Hardware Version field when the Wireless tab’s Read sidebar
button is selected and has a factory default setting of blank. If the read was not successful, an
error message will be displayed and the Hardware Version field will remain blank. To view
the connection status of the wireless device check the message in the Connect field.
Security Selection
The Security Selection Toggle Choice Control displays the current security protocol.
Currently, the only available Security Selection is “WEP128”, which sets the security protocol
to 128-bit encryption.
Currently, the only available Security Selection is “WEP128”, which sets the security protocol
to 128-bit encryption.
Lead Selection
The Lead Selection button sets and displays the ECG lead for the attached wireless device.
ECG lead selection options include Lead I, Lead II and Lead III.
ECG lead selection options include Lead I, Lead II and Lead III.
• Data is shown in the Lead Selection field when the Wireless tab’s Read sidebar button
is selected. Lead Selection has a factory default setting of blank. If the read was not
successful, an error message will be displayed and the Lead Selection field will remain
blank. To view the connection status check the message in the Connect field.
successful, an error message will be displayed and the Lead Selection field will remain
blank. To view the connection status check the message in the Connect field.
• The Lead to be monitored by a connected device can be assigned by selecting the
Program sidebar button.
NOTE:
The Lead Selection button will not be shown when the
device cannot be recognized or there is a Read error.
device cannot be recognized or there is a Read error.
MESSAGE
REASON
Connected to 2.4 Telemetry
The connection with the Telepack-2.4 was
successful.
successful.
Not Connected
The connection with the wireless device was not
successful.
successful.
Error: Could not receive data
The connection with the wireless device was not
successful. Either there was no response from the
device or the device is not connected.
successful. Either there was no response from the
device or the device is not connected.