Mindray DS USA Inc. WT0707-00000 Manual De Usuario

Telepack with Nonin SpO2 Module (Optional)

Telepack (Optional)

10 - 14

0070-10-0690-01

Panorama™ Operating Instructions

2. Route the cable in the channel on the back of the unit. The channel regions (shown in

FIGURE 10-12) should also be pressed firmly to ensure that they are properly placed.

FIGURE 10-12 Securing the Patient Cable

10.5.5

Attaching the Finger Clip Sensor

1. Insert the finger (preferably the index, middle, or ring finger) into the Nonin finger clip

until the end of the finger reaches the finger stop (shown in FIGURE 10-13). Keep the
fingernail facing the sensor top. Ensure that long fingernails are not interfering with the
proper finger position.

NOTE:

Disposable finger sensors (shown in FIGURE 10-14) may
also be used. Follow the packaging directions carefully to
ensure proper application.

NOTE:

For best results, when using the sensor for data collection,
secure the sensor cable independently from the sensor with
medical device tape, preferably around the base of the
finger. Be sure that the tape securing the cable does not
restrict the blood flow.

CAUTION:

Tissue damage or inaccurate SpO

measurements may be

caused by incorrect sensor application or use, such as
wrapping too tightly, applying supplemental tape, failing to
inspect the sensor site periodically, or failing to position
appropriately. Carefully read the sensor directions for use,
the Panorama Operating Instructions, and all precautionary
information before use.

FIGURE 10-13 Reusable finger clip

sensor

FIGURE 10-14 Disposable sensor