Honeywell International Inc. WLUWIFIM010 Manual De Usuario
CAGE CODE:
97896
SCALE: NONE
SIZE: A
DWG NO.
REV:
SHEET 15
HIF-1472R6(1)
8.5.1. Main Connector
The WLU uses a single connector for signal and power. The connector is labeled, J1. Figure 8-1 shows the
physical pinout of the main connector from the rear view.
physical pinout of the main connector from the rear view.
Figure 8-1 LRU Connector (J1) Physical Pinout
The WLU has a main connector to provide power/ground pins, discrete pins, and quadrax inserts for two
Ethernets. The baseline connector is Radiall RP58736. Power and signal wires have physical separation within
the connector by using spare pins as a spatial separator.
Table 8-2 Connector Names and Part Numbers for WLU
965-1702-001 Connectors
Name
Honeywell P/N
Type
Mating Connector Type
J1
440-2042-002
EPX, Male
EPX, Female
J2
315-5186-001
TNC Female
TNC Male
8.5.2. Signals, Power and Ground
Table 3-2 gives a description, lists the pin number, and labels the pin as an input or output. Refer to Figure 8-1
for a diagram of the connector.
for a diagram of the connector.
Table 8-3 LRU Connector (J1-B) Pin Assign
Pin Number
Signal Name
Comments
I/O
1
Spare
2
Spare
I
3
DISC_IN
Spare
I
4
FACTORY_DEFAULT_RST
I
5
POSITION 1
I
6
POSITION 2
I
7
POSITION 3
I
8
POWER_SUPPLY_OFF
I
9
uP_GOOD
O
10
PRI_LAN_LINK_STAT
O
11
SEC_LAN_LINK_STAT
O