Harman International Industries Inc MICROCORE Manual De Usuario

V

Installation / EMC

Should the equipment be delivered without a matching mains cable, the
latter has to be prepared by a trained person using the attached female plug 
(IEC 320 / C13 or IEC 320 / C19) with respect to the applicable regulations
in your country. 

!
line voltage matches the equipment rating (voltage, frequency) within the 
admissible tolerance. The equipment fuses must be rated in accordance with 
the specifications on the equipment.
Equipment supplied with a 3-pole appliance inlet (protection conforming to 
class I equipment) must be connected to a 3-pole AC power outlet in such a 
way that the equipment cabinet is connected to the protective earth.
For information on mains cable strain relief, please refer to Appendix 2.

Brown

Black

Blue

White

Green/Yellow

Green (or Green/Yellow)

Equipment of this protection class must be earthed using the provided earth 
terminal if one or more external signals are connected to the unit (see expla-
nation at the beginning of this paragraph).

B4

Electromagnetic Compatibility (EMC) 

The unit conforms to the protection requirements relevant to electromagnetic 
?@BJKMQK<3U!! BM#

 

a way that other equipment and systems can be operated normally

 

that it can operate properly

The unit has been tested and conforms to the EMC standards of the speci-
fied electromagnetic environment, as listed in the following declaration. 
The limits of these standards ensure protection of the environment and cor-
responding noise immunity of the equipment with appropriate probability. 
However, a professional installation and integration within the system are 
imperative prerequisites for operation without EMC problems. 
For this purpose, the following measures must be followed:

 $ #3

the supplied accessories

 $

components (systems, equipment) that also fulfill the EMC standards for 
the given environment