Honeywell International Inc. KXP2290 Manual De Usuario
n
KXP 2290
Rev. 0c, June/2006 Preliminary 05/24/06 10689I00.JA
Page 1-4
Shield braids must be clamped to the connector backshell using bar clamp assembly P/N 200-
10452-0000 which contains the following parts. See
10452-0000 which contains the following parts. See
and
for additional infor-
mation.
PN DESCRIPTION REV
-----------------------------------------------------------------------
-----------------------------------------------------------------------
200-10452-0000 BAR CLAMP ASSEMBLY -25 -
-------------------------------------------------------------------------------------------------
SYMBOL PART NUMBER FIND NO DESCRIPTION UM -0000
-------------------------------------------------------------------------------------------------
-------------------------------------------------------------------------------------------------
REF1 300-10452-0000 BAR CLAMP ASSEMBLY KMC 2220 RF .00
047-11178-0001 BACKSHELL BAR CLAMP LONG EA 1.00
076-03190-0001 SCREW PHP 4-40 X 7/16 SPECIAL EA 2.00
076-03190-0001 SCREW PHP 4-40 X 7/16 SPECIAL EA 2.00
187-01943-0001 BACKSHELL GASKET LONG EA 1.00
1.5
ACCESSORIES REQUIRED, BUT NOT SUPPLIED
Each antenna will require a connector and a length of coaxial cable to connect it to the KXP 2290
transponder.
transponder.
NOTE:
Connector 030-00101-0002, which accommodates
RG-400 cable, is included in the installation kit. Con-
nector P/N 030-00102-0001 is for larger diameter
cables i.e. P/N 024-00072-0000 and is not included.
RG-400 cable, is included in the installation kit. Con-
nector P/N 030-00102-0001 is for larger diameter
cables i.e. P/N 024-00072-0000 and is not included.
NOTE:
The transmission line loss design value for the KXP
2290 is 0.5 to 2.0 dB. Total line loss between the unit
and the antenna must be within this specification.
The following are three antenna cable connection
options for the KXP 2290; however, they may not
have line loss specifications within tolerance in all in-
stallations. Refer to
2290 is 0.5 to 2.0 dB. Total line loss between the unit
and the antenna must be within this specification.
The following are three antenna cable connection
options for the KXP 2290; however, they may not
have line loss specifications within tolerance in all in-
stallations. Refer to
for specific cabling information and to ensure a prop-
er line loss value.
er line loss value.
Use the following parts for installations using
HONEYWELL PART NUMBER
DESCRIPTION
QUANTITY
030-00101-0002
Connector, Coax
1
024-00051-0060
Cable,Coax
11 ft.
030-00005-0000
Connector, Coax Mod Type BNC
1