Honeywell International Inc. KXP2290 Manuale Utente

n

 Rev. 0c, June/2006 Preliminary 05/24/06 10689I00.JA

Page 1-4

Shield braids must be clamped to the connector backshell using bar clamp assembly  P/N 200-
10452-0000 which contains the following parts.  See  

 and 

 for additional infor-

mation.

1.5

ACCESSORIES REQUIRED, BUT NOT SUPPLIED

Each antenna will require a connector and a length of coaxial cable to connect it to the KXP 2290 
transponder.

NOTE:

Connector 030-00101-0002, which accommodates
RG-400 cable, is included in the installation kit.  Con-
nector P/N 030-00102-0001 is for larger diameter
cables i.e. P/N 024-00072-0000 and is not included.

NOTE:

The transmission line loss design value for the KXP
2290 is 0.5 to 2.0 dB.  Total line loss between the unit
and the antenna must be within this specification.
The following are three antenna cable connection
options for the KXP 2290; however, they may not
have line loss specifications within tolerance in all in-
stallations.  Refer to

for specific cabling information and to ensure a prop-
er line loss value.

Use the following parts for installations using