CleanAlert LLC FS-242 Manual De Usuario
2
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and the receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and the receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
FCC ID Number: AUPFS-242
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
FCC ID Number: AUPFS-242
IC Compliance
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du
Canada.
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
Cet appareil est conforme à Industrie Canada exempts de licence RSS norme.
Opération est soumis aux deux conditions suivantes: (1) cet appareil ne peut pas
causer de brouillage et (2) cet appareil doit accepter toute interférence, y compris
les interférences pouvant causer un fonctionnement intempestif du dispositif.
Canada.
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
Cet appareil est conforme à Industrie Canada exempts de licence RSS norme.
Opération est soumis aux deux conditions suivantes: (1) cet appareil ne peut pas
causer de brouillage et (2) cet appareil doit accepter toute interférence, y compris
les interférences pouvant causer un fonctionnement intempestif du dispositif.
Model: FS-242-BW Modèle: FS-242-BW
Model: FS-242-CW Modèle: FS-242-CW
IC Certification/Registration Number IC: 10341A-FS242
Numéro de Certification / d'enregistrement les IC: 10341A-FS242
Model: FS-242-CW Modèle: FS-242-CW
IC Certification/Registration Number IC: 10341A-FS242
Numéro de Certification / d'enregistrement les IC: 10341A-FS242
M
onitor
I
nstallation
Although the CleanAlert
FILTERSCAN
®
Air Filter Clogging Monitor and
Alarm, Model FS-242, may be installed upstream, downstream, or
differentially across the air filter (using optional tubing kit Model CA-4DP),
the best results will be found when installing downstream of the air filter
(that is, between the air filter and the system blower fan, usually located at
the return duct of the HVAC system).
differentially across the air filter (using optional tubing kit Model CA-4DP),
the best results will be found when installing downstream of the air filter
(that is, between the air filter and the system blower fan, usually located at
the return duct of the HVAC system).
WARNING!
Ensure that the HVAC system blower motor/fan is turned OFF
until told to otherwise!
until told to otherwise!
1. The
FILTERSCAN
®
Monitor is to be attached to the external wall of
the air duct, either upstream or downstream from the air filter to be
Formatted: Indent: Left: 1.97", Outline
numbered + Level: 2 + Numbering Style: 1, 2,
3, … + Start at: 1 + Alignment: Left + Aligned
at: 2.08" + Tab after: 2.33" + Indent at:
2.33"