CleanAlert LLC FS-242 Manual De Usuario
4
7. Apply power:
a. Models FS-242-B and FS-242-BW - Insert the wall mount power
adapter into the
FILTERSCAN
®
power receptacle, or install 4 AA
batteries and replace the Monitor front cover. See Appendix for
battery replacement.
battery replacement.
b. Models FS-242-C and FS-242-CW
– These models should be
installed by a qualified electrician, and are powered from the HVAC
systems auxiliary 24 VAC/DC power supply. A typical installation
will have that power run through rigid conduit to the
systems auxiliary 24 VAC/DC power supply. A typical installation
will have that power run through rigid conduit to the
FILTERSCAN
®
.
c. The STATUS LED should come on green momentarily then turn
and remain red. This indicates that the unit has not yet been
calibrated to the air filter and HVAC system upon which it is
installed.
calibrated to the air filter and HVAC system upon which it is
installed.
Power Receptacle
Formatted: Indent: Left: 1.97", Outline
numbered + Level: 2 + Numbering Style: 1, 2,
3, … + Start at: 1 + Alignment: Left + Aligned
at: 2.08" + Tab after: 2.33" + Indent at:
2.33"