GT-tronics HK Ltd HS-BTHP Manual De Usuario

Place the earbuds into the charging case. Make sure the 
Charging Contacts (5) make good contact with the 
charging pins. 

Press and hold the Power Button (8) for one second to 
start charging the earbuds. 

While charging, both the LED Indicator (2) and Charging 
LED Indicator (7) will show a steady red. When the earbuds 
are fully charged, the Charging LED Indicator (7) will show 
a steady blue and LED Indicator (2) will be off. 

Connect the Charging Port (6) to any 5V USB power supply 
with the included micro USB cable. 

While charging, the Charging LED Indicator (7) will show a 
steady red. (7) will become blue and all LEDs in the Battery 
Level Indicator (9) will be on when the charging case is 
fully charged.For first time use, charge the case for about 
1.5 hours. 

Press the Multifunction Button (1) on each earbud until the 
LED Indicator (2) turns blue. Place both earbuds next to 
each other for establishing connection. Voice prompt 

“Connected, left channel” will be played on the left earbud. 
Voice prompt “Connected, right channel” will be played on 
the right earbud. 

Turn on the Bluetooth function on your mobile device, 
select “HomeSpot AirBeans X” to pair and connect. 



Voice prompt “Second Device Connected” will be played.




Play & Pause Music:  
Press any one of the Multifunction Button (1) once to play 
music; press again to pause the music. 

Answer / End call:  
Press the Multifunction Button (1) once to answer the call, 
press again to end the call. 

Reject call:

Double press the Multifunction Button (1) to reject the 
incoming call.  

Redial:  
Double press the Multifunction Button(1) to redial the last 
number you called on your phone.  

Power Off 
Long press the Multifunction Button (1) on one of the 
earbuds until the LED Indicator (2) turns red, or simply 
dock the earbuds into the Charging Case and press the 
Power Button (8). 

The HomeSpot AirBeans will search for the last connected 
device for 60 seconds upon powering up, and will 
automatically connect to it when it is found. 

There is also an option to listen in mono mode if you would 
like to maximise continuous playtime. Do it by pairing only 
one of the earbuds at a time.  

Press the Multifunction Button (1) on a earbud until the 
LED Indicator (2) flashes red and blue alternately and 
follow the “Pairing” instruction. 

Multipoint connectivity only works in mono mode.  

Pair and connect a earbud with the first device (refers to 
Mono Mode)




Disconnect with the first device. Turn off the earbud. Long 
press the earbud again until blue and red light flash 
alternately. 

Pair the earbud with the second device.  Turn on the 
Bluetooth function of the first device, reconnect it to the 
earbud and the earbud will be paired and connected to 
both devices. 

EarBuds

Power On / Pairing

LED Indicator (2) flashes blue

Pairing Successful 

LED Indicator (2) flashes blue. 

Voice prompt “Second device 

connected”

Playing Music

LED Indicator (2) flashes blue 

slowly

Low Battery

LED Indicator (2) flashes red 

slowly. Voice prompt “Low 

battery, please charge”

Charging

LED Indicator (2) steady red

Fully Charged

LED Indicator (2) off

Charging Case

Charging

Charging LED Indicator (7) 

steady red

Fully Charged

Charging LED Indicator (7) 

steady blue

Low Battery

Charging LED Indicator (7) 

flashes red

20170328HS-TW

-INEAR-02-ENG