GT-tronics HK Ltd HS-BTHP 사용자 설명서
EARBUDS CHARGING
Place the earbuds into the charging case. Make sure the
Charging Contacts (5) make good contact with the
charging pins.
Charging Contacts (5) make good contact with the
charging pins.
Press and hold the Power Button (8) for one second to
start charging the earbuds.
start charging the earbuds.
While charging, both the LED Indicator (2) and Charging
LED Indicator (7) will show a steady red. When the earbuds
are fully charged, the Charging LED Indicator (7) will show
a steady blue and LED Indicator (2) will be off.
LED Indicator (7) will show a steady red. When the earbuds
are fully charged, the Charging LED Indicator (7) will show
a steady blue and LED Indicator (2) will be off.
CHARGING CASE CHARGING
Connect the Charging Port (6) to any 5V USB power supply
with the included micro USB cable.
with the included micro USB cable.
While charging, the Charging LED Indicator (7) will show a
steady red. (7) will become blue and all LEDs in the Battery
Level Indicator (9) will be on when the charging case is
fully charged.For first time use, charge the case for about
1.5 hours.
steady red. (7) will become blue and all LEDs in the Battery
Level Indicator (9) will be on when the charging case is
fully charged.For first time use, charge the case for about
1.5 hours.
Press the Multifunction Button (1) on each earbud until the
LED Indicator (2) turns blue. Place both earbuds next to
each other for establishing connection. Voice prompt
LED Indicator (2) turns blue. Place both earbuds next to
each other for establishing connection. Voice prompt
“Connected, left channel” will be played on the left earbud.
Voice prompt “Connected, right channel” will be played on
the right earbud.
Voice prompt “Connected, right channel” will be played on
the right earbud.
Turn on the Bluetooth function on your mobile device,
select “HomeSpot AirBeans X” to pair and connect.
select “HomeSpot AirBeans X” to pair and connect.
Voice prompt “Second Device Connected” will be played.
Play & Pause Music:
Press any one of the Multifunction Button (1) once to play
music; press again to pause the music.
Press any one of the Multifunction Button (1) once to play
music; press again to pause the music.
Answer / End call:
Press the Multifunction Button (1) once to answer the call,
press again to end the call.
Press the Multifunction Button (1) once to answer the call,
press again to end the call.
Reject call:
Double press the Multifunction Button (1) to reject the
incoming call.
Double press the Multifunction Button (1) to reject the
incoming call.
Redial:
Double press the Multifunction Button(1) to redial the last
number you called on your phone.
Double press the Multifunction Button(1) to redial the last
number you called on your phone.
Power Off
Long press the Multifunction Button (1) on one of the
earbuds until the LED Indicator (2) turns red, or simply
dock the earbuds into the Charging Case and press the
Power Button (8).
Long press the Multifunction Button (1) on one of the
earbuds until the LED Indicator (2) turns red, or simply
dock the earbuds into the Charging Case and press the
Power Button (8).
The HomeSpot AirBeans will search for the last connected
device for 60 seconds upon powering up, and will
automatically connect to it when it is found.
device for 60 seconds upon powering up, and will
automatically connect to it when it is found.
There is also an option to listen in mono mode if you would
like to maximise continuous playtime. Do it by pairing only
one of the earbuds at a time.
like to maximise continuous playtime. Do it by pairing only
one of the earbuds at a time.
Press the Multifunction Button (1) on a earbud until the
LED Indicator (2) flashes red and blue alternately and
follow the “Pairing” instruction.
LED Indicator (2) flashes red and blue alternately and
follow the “Pairing” instruction.
Multipoint connectivity only works in mono mode.
Pair and connect a earbud with the first device (refers to
Mono Mode)
Mono Mode)
Disconnect with the first device. Turn off the earbud. Long
press the earbud again until blue and red light flash
alternately.
press the earbud again until blue and red light flash
alternately.
Pair the earbud with the second device. Turn on the
Bluetooth function of the first device, reconnect it to the
earbud and the earbud will be paired and connected to
both devices.
Bluetooth function of the first device, reconnect it to the
earbud and the earbud will be paired and connected to
both devices.
Status
LED Status
EarBuds
Power On / Pairing
LED Indicator (2) flashes blue
Pairing Successful
LED Indicator (2) flashes blue.
Voice prompt “Second device
connected”
Playing Music
LED Indicator (2) flashes blue
slowly
Low Battery
LED Indicator (2) flashes red
slowly. Voice prompt “Low
battery, please charge”
Charging
LED Indicator (2) steady red
Fully Charged
LED Indicator (2) off
Charging Case
Charging
Charging LED Indicator (7)
steady red
Fully Charged
Charging LED Indicator (7)
steady blue
Low Battery
Charging LED Indicator (7)
flashes red
20170328HS-TW
-INEAR-02-ENG
MONO MODE
CHARGING
PAIRING
OPERATIONS
AUTO-RECONNECT
LED INDICATORS
CONNECT TO 2nd DEVICE