UTC Fire & Security Americas Corporation Inc 910C-SIMON Manual De Usuario

Chapter 4

Programming

To enter system programming mode, do the following:

1. Press the scroll buttons until the panel displays System programming.

2. Press Enter.  The system prompts for an access code.

3. Enter the access code from the codes listed in Table 11.  The system displays each entered access code 

digit as an asterisk.

 

4. Press Enter.  The panel is now in program mode. 

Note:  Do not remove panel power while in program mode.

Dealer code

You can use the dealer code to program all system options, including high-security options that are not 
accessible with the installer code if it is different from the dealer code.  Depending on how the access code 
is set, the default dealer access code is 654321, 54321, 4321 (factory default), or 321. This code can be used 
for all programming.

Installer code

Depending on how the access code is set, the default installer code is 654321, 54321, 4321 (factory 
default), or 321. This code is limited to changing all but the following: Dealer code, Code length, Downloader 
code, Phone lock, Phone #1, Phone #2, Phone 1 report mode, Phone 2 report mode, HW 1 function.