UTC Fire & Security Americas Corporation Inc 910C-SIMON Manual De Usuario

Chapter 5

Testing

For the central station operator to initiate an audio session:

Note:  Panel voice announcements are silenced during AVM sessions. If the operator does not terminate the session correctly, 

panel announcements may not occur for up to 90 seconds after the operator hangs up.

1. After the panel has completed reporting the alarm, pick up the CS phone and press the * button to start 

the audio session.

2. Press 1 or 0 to speak, 2 for VOX operation, and 3 or 6 to listen.

3. Press 99 to terminate the session.  

Testing this feature requires two people; one at the alarm site and the other at the location the panel is 
programmed to call.  

1. Contact the central monitoring station (if system is monitored) to inform them you are testing the 

system and not to dispatch authorities.

2. At the system site, put the system into an alarm condition.

3. At the calling location, pick up the phone after it starts ringing. You should hear the panel voice 

announce Press star for alarm. 

4. Press * and the panel voice identifies the alarm. If there is more than one alarm in progress, the user 

must press * for the panel voice to identify them.

Note:  You must terminate the call by pressing #. Otherwise, the panel may not disconnect from the phone line for up to 2 

minutes.

5. After all alarms have been identified, the panel announces Press # to exit.

6. Press # to terminate the call.

0-1

Speak

2

VOX  operation

3 or 6

Listen 

7

Extend session for 90 more seconds

88

Terminates session with call back (the panel answers on the first ring if called within 5 minutes)

99

Terminates session with no call back