UTC Fire & Security Americas Corporation Inc 910C-SIMON Manual De Usuario

Simon XT

Installation Manual

The following sections describe how to test X10 lamp, siren, appliance, and universal module operation.

•

Control panel: Press the asterisk button (*) and the unit number of the lamp module using the numeric 
buttons to test individual lamp modules 1 through 8. The panel responds with Light # on/off.  Press the 
asterisk button (*) twice to turn on all lamp modules. Press the pound button (#) twice to turn off all 
lamp modules.

•

Keyfob: Press the Light button repeatedly to turn all lights on and off. The panel responds with Lights 
on/off.

•

Remote handheld touchpad: Press the Lights on button and the unit number of the lamp module 
using the numeric buttons to test individual lamp modules 1 through 8. The panel responds with Light 
# on/off. Pressing the Lights on or Lights off button twice turns all the lights on or off.

All sirens turn off when the system is disarmed or when the siren timeout expires. Siren priority is fire (highest 
priority), intrusion, and emergency. Table 35  identifies the light information for each of these siren types.

If an alarm of greater priority occurs during an alarm of lower priority, the greater priority alarm sirens sound. 
Fire alarms sound a temporal 3 pattern (0.5 seconds on, 0.5 seconds off for three beeps then 1.5 seconds off).

Note:  The X10 siren must be set to unit #9 to “hear” emergency alarms and status beeps. To hear emergency alarms only, set to 

unit #10. 

X10 lights

Steady

Flashing

Steady

X10 siren

Steady

Steady

Alarm beeps

Interior and  panel Siren

Temporal 3

Steady

Fast on/off