TEKTELIC Communications T0005281 Manual De Usuario
Kona Micro Indoor User Guide
T0005281_UG
Version 0.12
TEKTELIC Communications Inc.
Confidential
Page 9 of 23
Unpacking and Inspection
The following should be considered during the unpacking of a new Kona Micro Indoor Gateway.
1. Inspect the shipping carton and report any significant damage to TEKTELIC.
2. Unpacking should be conducted in a clean and dry location when possible.
3. Do not discard the shipping box or foam inserts as they will be required if a unit is returned
for repair or re-configuration.
Required Equipment for Installation
No tools are required to install the Kona Micro Indoor Gateway module.
Kona Micro Indoor Gateway Mounting
Kona Micro Indoor Gateway can be placed on a flat surface or be mounted to a wall with M3
screws to locations on the back of the module illustrated in Figure 3.
screws to locations on the back of the module illustrated in Figure 3.
Figure 3: Kona Micro Indoor Gateway Mounting Bracket Attachment Screw Locations
Mounting
screw location
Mounting
screw location
screw location