Bogen ACD2X2U Prospecto

Descargar
Página de 1
• For use with both 2 ft. x 2 ft. and 2 ft. x 4 ft. sus-
pended tile ceilings (support rail crossbar included
for 2 ft. x 4 ft. suspended tile ceilings)
• Finely perforated grille covers entire front of
speaker
• Fully enclosed, industrial grade steel construction
• Self-contained 
1-watt amplifier
• 8" main cone speaker, with secondary cone
• Front-mounted, recessed volume control
• Non-reflective finish, available in off-white
(ACD2X2) and bright white (ACD2X2U)
• Seismic attachment points
• Complies with UL-2043
Features
Description
Specifications subject to change without notice.
© 2006 Bogen Communications, Inc.
Part No. 54-8023-23D   0902
Self-Amplified
Drop-In Ceiling
Speaker 
Bogen's ACD2X2 Drop-In Ceiling Speaker is a full-range, 
1-watt, self-amplified speaker that is quick and easy to
install. Simply wire it and drop it into place. Available in off-white (ACD2X2) and bright white (ACD2X2U).
The ACD2X2 is 2' x 2', designed to fit perfectly into place in 2' x 2' ceiling grids - without needing to cut ceiling
tiles. The ACD2X2 can also be easily installed in 2' x 4' ceiling grids using the included support rail.
The speaker shall be a Bogen Model ACD2X2 (or
ACD2X2U) Drop-In Self-Amplified Ceiling Speaker,
which shall be fully enclosed and constructed of indus-
trial grade steel. It shall be comprised of a damped
high-compliance factory-mounted 8" loudspeaker that
shall consist of an 8" treated paper cone and a 
10-ounce magnet, including a secondary cone.
The unit shall have a 
1-watt amplifier. The typical 
current consumption shall be 
1 CU (50 mA).
Frequency response shall be 95 Hz - 
12 kHz. Input
sensitivity shall be 
125 mVrms. Input impedance shall
be 2k ohms. Dispersion shall be 
100°.
The speaker shall have a non-reflective, off-white (or
bright white for ACD2X2U) metal finish grille with a
recessed volume control accessible through front
grille. It shall include 4 seismic attachment points.
The speaker assembly will fit into 2' x 2' and 2' x 4'
ceiling tiles. For 2' x 2' installations, a support rail shall
not be needed and no cuts to the ceiling shall be nec-
essary. For 2' x 4' installations, a single cut to the ceil-
ing tile and an included support rail shall be needed.
The speaker shall measure 23-7/8" W x 5" H x 
23-7/8" D and shall weigh 
12 lb.
Architect and
Engineer
Specifications
Technical
Specifications
Max. SPL: 94 dB (
1m)
Frequency Response: 95 Hz - 
12 kHz 
Supply Voltage: 24V  DC
Typical Current Units:
1 CU (50 mA)
Idle Current: 5 mA (nominal)
Input Sensitivity:
125 mVrms
Input Impedance: 2k ohms
50 Spring Street, Ramsey, NJ 07446, U.S.A.
Tel: 20
1-934-8500, Fax: 201-934-9832, Web Site:  www.bogen.com
Dispersion:
100°
Cone: 8" cone speaker, with secondary cone
Magnet Weight:
10 oz.
Connection: Wire leads via wire nuts (included)
Dimensions: 23 -7/8" W x 5" H x 23 -7/8" D
Product Weight:
12 lb.
with back can and recessed
volume control
Models
ACD2X2, ACD2X2U