Bogen ACD2X2U 产品宣传页

• For use with both 2 ft. x 2 ft. and 2 ft. x 4 ft. sus-

pended tile ceilings (support rail crossbar included
for 2 ft. x 4 ft. suspended tile ceilings)

• Finely perforated grille covers entire front of

speaker

• Fully enclosed, industrial grade steel construction

• Self-contained 

1-watt amplifier

• 8" main cone speaker, with secondary cone

• Front-mounted, recessed volume control

• Non-reflective finish, available in off-white

(ACD2X2) and bright white (ACD2X2U)

• Seismic attachment points

• Complies with UL-2043

Specifications subject to change without notice.
© 2006 Bogen Communications, Inc.
Part No. 54-8023-23D   0902

Bogen's ACD2X2 Drop-In Ceiling Speaker is a full-range, 

1-watt, self-amplified speaker that is quick and easy to

install. Simply wire it and drop it into place. Available in off-white (ACD2X2) and bright white (ACD2X2U).

The ACD2X2 is 2' x 2', designed to fit perfectly into place in 2' x 2' ceiling grids - without needing to cut ceiling
tiles. The ACD2X2 can also be easily installed in 2' x 4' ceiling grids using the included support rail.

The speaker shall be a Bogen Model ACD2X2 (or
ACD2X2U) Drop-In Self-Amplified Ceiling Speaker,
which shall be fully enclosed and constructed of indus-
trial grade steel. It shall be comprised of a damped
high-compliance factory-mounted 8" loudspeaker that
shall consist of an 8" treated paper cone and a 
10-ounce magnet, including a secondary cone.

The unit shall have a 

1-watt amplifier. The typical 

current consumption shall be 

1 CU (50 mA).

Frequency response shall be 95 Hz - 

12 kHz. Input

sensitivity shall be 

125 mVrms. Input impedance shall

be 2k ohms. Dispersion shall be 

100°.

The speaker shall have a non-reflective, off-white (or
bright white for ACD2X2U) metal finish grille with a
recessed volume control accessible through front
grille. It shall include 4 seismic attachment points.

The speaker assembly will fit into 2' x 2' and 2' x 4'
ceiling tiles. For 2' x 2' installations, a support rail shall
not be needed and no cuts to the ceiling shall be nec-
essary. For 2' x 4' installations, a single cut to the ceil-
ing tile and an included support rail shall be needed.

The speaker shall measure 23-7/8" W x 5" H x 
23-7/8" D and shall weigh 

12 lb.

Max. SPL: 94 dB (

1m)

Frequency Response: 95 Hz - 

12 kHz 

Supply Voltage: 24V  DC

Typical Current Units:

1 CU (50 mA)

Idle Current: 5 mA (nominal)

Input Sensitivity:

125 mVrms

Input Impedance: 2k ohms

50 Spring Street, Ramsey, NJ 07446, U.S.A.
Tel: 20

1-934-8500, Fax: 201-934-9832, Web Site:  www.bogen.com

Dispersion:

100°

Cone: 8" cone speaker, with secondary cone

Magnet Weight:

10 oz.

Connection: Wire leads via wire nuts (included)

Dimensions: 23 -7/8" W x 5" H x 23 -7/8" D

Product Weight:

12 lb.

with back can and recessed

volume control