Shenzhen Jie Xin Chuang Zhan Science and Technology Co. Ltd COLORS Manual De Usuario
Then click the “System” table
Notice: You can check the firmware version on this page.
Notice: You can check the firmware version on this page.
4. In the System table, choose the firmware file, then click the “Apply” button, as shown below
5. Wait until the firmware update is complete
6. Repeat the above steps to update other firmware
6. Repeat the above steps to update other firmware
2.2 Factory Reset
There are two ways to reset the device into factory settings: use a hardware button or use the companion
App. If you don’t find the factory reset button in section 1.1, you will have to factory reset the device in the
companion App. To do this, go to the speaker settings (refer to section 2.1, step 1), click on Factory
Reset. You will hear a voice prompt before the speaker reboots.
App. If you don’t find the factory reset button in section 1.1, you will have to factory reset the device in the
companion App. To do this, go to the speaker settings (refer to section 2.1, step 1), click on Factory
Reset. You will hear a voice prompt before the speaker reboots.
10 10 10 25