Shenzhen Jie Xin Chuang Zhan Science and Technology Co. Ltd COLORS Manual De Usuario
2.3 Useful commands
2.3.1 Check Speaker Software Version
http://Speaker_IP/
2.3.2 Dump Speaker Log File
Use a HTTP command
http://Speaker_IP/httpapi.asp?command=getsyslog
Use the App
In the companion App, click on the “Send feedback” button in the App settings.
3 Reminder
If your Wi-Fi password is changed, or M110 is in a new Internet environment, you need to repeat the
above setting steps to reconnect Wi-Fi.
above setting steps to reconnect Wi-Fi.
Please make sure your Wi-Fi frequency is 2.4 GHz. SoundBot-M110 doesn’t work under 5.0 GHz-
frequency Wi-Fi.
frequency Wi-Fi.
Please avoid overuse of broadband. It is suggested that the router should not be connected with
many devices.
many devices.
Don’t use the device in a complicated network environment (such as offices, bars, bridge connection
of multiple routes, or too many router around) it may result in an unstable connection, interrupted
playing, connection failure, not available for use, etc.
of multiple routes, or too many router around) it may result in an unstable connection, interrupted
playing, connection failure, not available for use, etc.
4
Use Bluetooth connection mode
Tap the mode change button “MODE” on M110 and switch to Bluetooth mode. Then open the Bluetooth
setting on your smart device, search for “SoundBot-M110”, choose and connect the device by Bluetooth
and then play.
setting on your smart device, search for “SoundBot-M110”, choose and connect the device by Bluetooth
and then play.
5 Other functions
Low-voltage alarm: When battery power is lower than 10%, speaker gives out warning alerts. Please
charge the speaker in time. When battery power is lower than 3%, the system will be powered off
automatically.
charge the speaker in time. When battery power is lower than 3%, the system will be powered off
automatically.