Casio Communication Inc. CP-2575 Manual De Usuario
CP-2575/CP-2070 US OG Preliminary Text
March 17, 2000
March 17, 2000
CP2575 M1S1 OG.doc
3
•
If the handset is in "Standby Mode" but not in the charging cradle, the display will go blank after a short
time to conserve battery power.
time to conserve battery power.
To Place A Call
Pick up the handset and press TALK. The following display will be briefly shown. This display indicates
that the handset is establishing contact with the charging cradle.
Pick up the handset and press TALK. The following display will be briefly shown. This display indicates
that the handset is establishing contact with the charging cradle.
SCANNING
CHANNELS...
A dial tone will be established. (In this example, CH03 is the current channel number of 40 available
channels in your area.) Wait for dial tone and dial the phone number. The number will appear in the display
as you dial.
VOLUME
CH03
NOTE:
CHANNELS...
A dial tone will be established. (In this example, CH03 is the current channel number of 40 available
channels in your area.) Wait for dial tone and dial the phone number. The number will appear in the display
as you dial.
VOLUME
CH03
NOTE:
•
The LINE-IN-USE INDICATOR on the charging cradle lights solid to show the handset is in use.
To End A Call
To hang up, press TALK or return the handset to the charging cradle.
NOTE:
To hang up, press TALK or return the handset to the charging cradle.
NOTE:
•
When you return the handset to the charging cradle, you are hanging up the phone and returning to
Standby Mode. The CP-2575/CP-2070 is now ready to receive a call and the CHARGING INDICATOR
lights solid to show that the battery is charging.
Standby Mode. The CP-2575/CP-2070 is now ready to receive a call and the CHARGING INDICATOR
lights solid to show that the battery is charging.
If You Miscalled
A Number
Press TALK twice ("off" and "on.") Wait for dial tone and dial the correct number.
To Receive A Call
When the phone rings, pick up the cordless handset and press TALK. You will briefly see the "SCANNING
CHANNELS" display, followed by the "Volume" display. Speak to the caller.
To hang up, press TALK on the handset or return the handset to the charging cradle.
Handset Volume Control
Whenever the CP-2575/CP-2070 is in "Talk" mode, the handset volume will be displayed.
Press the DOWN or UP ARROW KEY to adjust the volume.
When TALK is pressed, the handset volume returns to the volume level at which you programmed it (see
PROGRAMMING THE CP-2575/CP-2070, "Default Volume").
A Number
Press TALK twice ("off" and "on.") Wait for dial tone and dial the correct number.
To Receive A Call
When the phone rings, pick up the cordless handset and press TALK. You will briefly see the "SCANNING
CHANNELS" display, followed by the "Volume" display. Speak to the caller.
To hang up, press TALK on the handset or return the handset to the charging cradle.
Handset Volume Control
Whenever the CP-2575/CP-2070 is in "Talk" mode, the handset volume will be displayed.
Press the DOWN or UP ARROW KEY to adjust the volume.
When TALK is pressed, the handset volume returns to the volume level at which you programmed it (see
PROGRAMMING THE CP-2575/CP-2070, "Default Volume").
MODEM MONITORTM
When the CP-2575/CP-2070 detects a modem in use on the line to which it is connected, the Modem
MonitorTM feature prevents the CP-2575/CP-2070 from going off-hook. When you attempt to make a call on
the CP-2575/CP-2070 and a modem is connected, you will hear the modem data through the handset. The
data you hear is protected from interruption. The MODEM MONITORTM INDICATOR on the base will
flash slowly and when you attempt to go off-hook the handset will display:
MODEM IN USE
NOTE:
When the CP-2575/CP-2070 detects a modem in use on the line to which it is connected, the Modem
MonitorTM feature prevents the CP-2575/CP-2070 from going off-hook. When you attempt to make a call on
the CP-2575/CP-2070 and a modem is connected, you will hear the modem data through the handset. The
data you hear is protected from interruption. The MODEM MONITORTM INDICATOR on the base will
flash slowly and when you attempt to go off-hook the handset will display:
MODEM IN USE
NOTE:
•
If you wish to override Modem MonitorTM after pressing TALK you can do so by pressing 9. (You may
also need to manually deactivate the modem activity at your computer or fax machine.)
also need to manually deactivate the modem activity at your computer or fax machine.)
Call Timer
About 10 seconds after you enter "Talk" mode, a Call Timer will appear on the display. The timer will
automatically be reset whenever you place a new call.
NOTES:
About 10 seconds after you enter "Talk" mode, a Call Timer will appear on the display. The timer will
automatically be reset whenever you place a new call.
NOTES:
•
The length of time shown on the display is intended only to be an estimate duration of a phone call. Casio
makes no guarantees regarding the accuracy of this timer.
makes no guarantees regarding the accuracy of this timer.
•
The Call Timer will not be disrupted if Hold is pressed. The Hold timer (5 minute count down timer)
will display and the Call Timer will continue, hidden from view, during any Hold mode.
will display and the Call Timer will continue, hidden from view, during any Hold mode.
Last Call Time Display