Casio Communication Inc. CP-2575 Manual De Usuario
CP-2575/CP-2070 US OG Preliminary Text
March 17, 2000
March 17, 2000
CP2575 M1S1 OG.doc
5
Battery Condition
You can check the power level of the battery to avoid battery depletion.
Press BATTERY when the handset is out of the charging cradle. The following display will appear when the
battery is fully charged:
As the battery discharges, the stack symbols will disappear, starting from the right. When the battery is low,
the display will look like:
Press BATTERY again or wait a few seconds to leave battery condition mode.
NOTES:
You can check the power level of the battery to avoid battery depletion.
Press BATTERY when the handset is out of the charging cradle. The following display will appear when the
battery is fully charged:
As the battery discharges, the stack symbols will disappear, starting from the right. When the battery is low,
the display will look like:
Press BATTERY again or wait a few seconds to leave battery condition mode.
NOTES:
•
Charge the battery for 12-15 hours before using.
•
If BATTERY is pressed while the handset is in the cradle, "Charging" will appear in the LCD.
Low Battery Indicator
The CP-2575/CP-2070 will automatically detect a low battery. If this happens, you will hear a double beep,
and the "Low Battery" display will appear.
If the Low Battery indicator appears while you are talking on the CP-2575/CP-2070, you may only have a
few minutes left before the battery discharges completely, in which case you will be disconnected. To
prevent this, simply pick up an extension phone and place the CP-2575/CP-2070 back in the charger. Place
the handset in the charger for 12 - 15 hours to recharge the battery.
NOTE:
The CP-2575/CP-2070 will automatically detect a low battery. If this happens, you will hear a double beep,
and the "Low Battery" display will appear.
If the Low Battery indicator appears while you are talking on the CP-2575/CP-2070, you may only have a
few minutes left before the battery discharges completely, in which case you will be disconnected. To
prevent this, simply pick up an extension phone and place the CP-2575/CP-2070 back in the charger. Place
the handset in the charger for 12 - 15 hours to recharge the battery.
NOTE:
•
The battery can be recharged many times, but if you get a low battery indication even after 12-15 hours
of charging, you should replace the battery pack. See the Accessories order form to purchase a battery
pack.
of charging, you should replace the battery pack. See the Accessories order form to purchase a battery
pack.
OUT OF RANGE Alarm
The CP-2575/CP-2070 cordless handset operates like any other cordless handset. You can use it in the yard,
at the pool, at the mailbox, or any place within the operating range of the charging cradle. If you move out of
the charging cradle's operating range, you may hear a triple beep warning tone and/or static interference.
Move closer to the charging cradle to deactivate the alarm and prevent disconnection. If you remain out of
range for too long, the CP-2575/CP-2070 will disconnect from the line.
If the handset loses its security code, you will also hear an alarm tone. To reset this security code, place the
handset in the charging cradle for a few seconds. Pick up the handset and try your call again.
Interference from other appliances may also cause the alarm to sound. To prevent interference, move the
charging cradle to
another location and raise its antenna.
CALL WAITING & CALLER ID
CALLER ID SERVICE OPTIONS
You must subscribe to a Caller ID service (available from most local telephone companies) in order to
receive Caller ID information. Most Caller ID services offer the following two options:
1.
The CP-2575/CP-2070 cordless handset operates like any other cordless handset. You can use it in the yard,
at the pool, at the mailbox, or any place within the operating range of the charging cradle. If you move out of
the charging cradle's operating range, you may hear a triple beep warning tone and/or static interference.
Move closer to the charging cradle to deactivate the alarm and prevent disconnection. If you remain out of
range for too long, the CP-2575/CP-2070 will disconnect from the line.
If the handset loses its security code, you will also hear an alarm tone. To reset this security code, place the
handset in the charging cradle for a few seconds. Pick up the handset and try your call again.
Interference from other appliances may also cause the alarm to sound. To prevent interference, move the
charging cradle to
another location and raise its antenna.
CALL WAITING & CALLER ID
CALLER ID SERVICE OPTIONS
You must subscribe to a Caller ID service (available from most local telephone companies) in order to
receive Caller ID information. Most Caller ID services offer the following two options:
1.
Standard Caller ID with name and number
The name, phone number and local time (if available) of the incoming call are received after your
The name, phone number and local time (if available) of the incoming call are received after your
phone rings.
2.
2.
Call Waiting Caller ID with name and number
The name, phone number and local time (if available) of the incoming call are received after your
The name, phone number and local time (if available) of the incoming call are received after your
phone rings. If you are on the phone and receive another call, you will hear a tone, telling you there is a call
waiting. The Call Waiting Caller ID information will appear on the display.
NOTE:
waiting. The Call Waiting Caller ID information will appear on the display.
NOTE:
•
The display illustrations in the remainder of this section are presented with the assumption that your
Caller ID service provides both name and number. If you have a number-only service, the name will be
blank.
Caller ID service provides both name and number. If you have a number-only service, the name will be
blank.
Answering
Caller ID calls
When you receive a call, the CP-2575/CP-2070 will receive the Caller ID information from your phone
company within the first two rings. Caller ID information will display even if the ringer is set to off.
When all of the data is received, you will hear a low-high confirmation tone and the Caller ID information
will appear on the display:
SMITH JAN
Caller ID calls
When you receive a call, the CP-2575/CP-2070 will receive the Caller ID information from your phone
company within the first two rings. Caller ID information will display even if the ringer is set to off.
When all of the data is received, you will hear a low-high confirmation tone and the Caller ID information
will appear on the display:
SMITH JAN
1 310 555 1234