Motorola Solutions Inc. 99FT4100 Manual De Usuario

NOTICE: The example in this Appendix applies for a UHF band system. For different frequency
bands, applicable band-specific parameters should be employed to carry out the computations
yielding band-specific compliance boundaries.

Compliance is established with respect to the U.S. FCC regulations [11] in a typical system
configuration of the MOTOTRBO SLR 1000 Repeater described in the following as derived.

A computational assessment was carried out to provide an estimation of the EME exposure and
compliance distances relative to the FCC ID ABZ99FT4100, Model AAR11SDGANQ1AN with
HKAE4003_, HKAE4004_, and HKAE4005_ antennas.

The following table provides the compliance distances for general public and occupational-type
exposure, for the UHF frequency band, antenna, and parameters considered in this analysis, based on
a typical system configuration:

Table 28: Indoor EME Compliance Distances Based on Example UHF Evaluation

General public exposure

40 cm

40 cm

Occupational-type exposure

40 cm (*)

40 cm (*)

Table 29: Outdoor EME Compliance Distances Based on Example UHF Evaluation

General public exposure

67 cm

67 cm

Occupational-type exposure

14 cm (*)

14 cm (*)

(*) This distance is very conservative and may be reduced significantly by carrying out a specific
occupational exposure analysis. The present analysis comprises a single distance suitable for both
exposure conditions.

The technical characteristics of the FCC ID ABZ99FT4100 Model AAR11SDGANQ1AN are as follows:

• Transmit Frequency Range: 400–527 MHz

• Maximum Power: 10 W

• Maximum Duty Cycle: 100%

• Antenna Information:

- Frequency Range: 400–530 MHz

- Monopole (17 cm)

- Peak Gain: 4.1 dBi

MN003557A01-AA

Appendix E: MOTOTRBO Repeater EME Assessment

Send Feedback

  99