Motorola Solutions Inc. 99FT4100 Manual De Usuario
patch is at a high enough drive level to leave jumper S10 in the factory default position (position is
"out").
"out").
Radio Tx
The transmitter yields 60% RSD with 80mV rms into the Tx Audio port. The “Radio Tx” signal delivered
by the Remote Tone Adapter is at a high enough drive level to leave jumper S9 in the factory default
position (position A).
by the Remote Tone Adapter is at a high enough drive level to leave jumper S9 in the factory default
position (position A).
Channel Steering
Leave Jumper S7 in position B (factory default) to match the SLR 1000 Series Repeater's active low
setting for the Channel Steering 1 signaling.
setting for the Channel Steering 1 signaling.
Monitoring
Leave jumper S8 in the “IN” position (factory default) to match the active low setting for the Monitor
GPIO signaling.
GPIO signaling.
PTT
Leave jumper S5 in the “IN” position (factory default) to match the active low setting for the PTT GPIO
signaling.
signaling.
Wildcard 1 (optional)
Leave jumper S6 in position A (factory default) to match the active low setting for the Repeater
Disabled GPIO signaling.
Disabled GPIO signaling.
MN003557A01-AA
Appendix D: SLR 1000 Series Third Party Controllers
Appendix D: SLR 1000 Series Third Party Controllers
98
Send Feedback
Preliminary
FCC
Filing