Panasonic Corporation of North America RPBT10R Manual De Usuario

Descargar
Página de 17
RQT8993
10
11
RQT8993
Precautions
The unit
This unit uses the 2.4 GHz radio frequency 
band (Bluetooth). However other wireless 
equipment may use the same frequency. Be 
sure to take note of the following to prevent 
radio wave interference from other equipment.
Restriction of use
For use only in your country.
Range of use
The range of use is up to approximately 10 m 
(30 ft.). The range may be less depending on 
the structure of the building, the environment 
and any obstacles between the receiver and 
the transmitter. Such obstacles as reinforced 
concrete walls and metal doors, in particular, 
obstruct the transmitter’s signals.
Interference from other equipment
Due to radio interference, malfunctions such as 
sound distortion may occur if the unit is placed 
too close to other equipment. We recommend 
keeping the unit as far away as possible from 
the following devices:
Bluetooth devices other than this unit, wireless 
LAN, microwaves, office automation devices, 
digital cordless telephones and other electronic 
devices
The unit is designed to automatically avoid 
radio interference from these household 
devices. However the sound will be broken 
when radio interference occurs.
Using the unit
●  Do not drop, hit or otherwise subject the 
transmitter or receiver to strong shocks of 
any kind. This may cause damage.
●  Do not expose the unit to water or other 
liquids as it may cause damage.
●  Do not use near microwave ovens, 
pacemakers or other industrial, chemical or 
medical equipment.
●  Do not use inside an aircraft, as this may 
compromise the safety of the aircraft.
●  Keep the ear pads, out of the reach of children 
to prevent them from being swallowed.
Basic flow of operations
 Connect the transmitter to the iPod
®
.
Connect it to the iPod
®
’s dock connector.
(Refer to page 15.)
•  Prior to shipment from the 
m a n u f a c t u r i n g   p l a n t ,   t h e 
transmitter and receiver pair is 
registered.
 Setting the pair
Use a Bluetooth connection for the receiver and 
transmitter that has been connected to the iPod
®
.
The pair setting is performed 
automatically.
(Refer to page 15.)
 Listening to music
•  You can listen to the music played by the iPod
®
 with 
the receiver.
•  You can play, pause and control the music in other 
ways with the receiver. 
(Refer to page 16.)
 Registering the device pair
The receiver and Bluetooth cellphone must be registered 
for the parties to be connected.Once they have been 
registered, they need not be registered again.
(Refer to page 18.)
 Setting the pair
Use a Bluetooth connection for the receiver and 
Bluetooth cellphone.
(Refer to page 19.)
 Talking on the phone
You can now operate the receiver and receive incoming 
calls.
(Refer to page 20.)
Listening to music
Talking on the phone
RQT8993-P(RP-BT10P)0528.indd   10-11
RQT8993-P(RP-BT10P)0528.indd   10-11
2007/05/28   16:40:58
2007/05/28   16:40:58