Panasonic Corporation of North America RPBT10R Manual De Usuario

RQT8993

Preparations (prior to use)

Concerning the connection of the stereo earphones (L, R)

Insert the input plug of the stereo earphones into the AUDIO OUT connector for use.

How to fit the stereo earphones into your ears properly

If the earpieces are not fitted snugly into your ears, you may not obtain a good seal or hear bass sounds. Fit them
into your ears snugly for a better sound quality listening experience.

■

Lift the upper part of your left ear lobe

using your right hand (and vice versa).

Twist slightly and gently push the

earphones in.

Concerning the ear pads

Your earphones are fitted with M size ear pads at the time of their purchase.
If you feel that they are too small or too large for your ears, replace them with the S or L size pads.

■

Listening to music on your iPod

Setting the pair

As soon as the receiver and transmitter power are turned on, the pair setting is performed automatically.

Connect the transmitter to the dock

connector on the bottom of the iPod

• The iPod

’s power is now automatically turned on.

Press and hold the MIC button on the

receiver for 2 seconds.

• The receiver’s power is now turned on, and the lamp

(red) blinks slowly.

Press and hold the Transmitter button on

the transmitter for 2 seconds.

• The transmitter’s lamp (red) starts blinking rapidly, and

when the pair setting is completed, the lamps (blue)
on the transmitter and receiver start blinking slowly to
indicate that the pair setting has been completed.

Note:

• To establish pairing again after pairing has been

released or the transmitter’s power was turned
off, press and hold the Transmitter button on
the transmitter for 2 seconds. The pair setting is
restored.

Note:

• Discontinue use if you experience discomfort. Continued use may cause rashes or other allergic reactions.

RQT8993-P(RP-BT10P)0528.indd 14-15

2007/05/28 16:41:35