ICOM 269900 Manual De Usuario

29

6

MEMORY CHANNELS

■ Programming memory/bank name 

Each memory channel can be programmed with an alphanu-
meric channel name for easy recognition and can be indicated
independently by channel. Names can be a maximum of 8
characters.

q Push [MR S.MW] to select memory mode.
w Rotate [R-DIAL] to select the desired memory channel.
e Push [MR S.MW] for 1 sec. to select the select memory

write condition.

• 1 short and 1 long beep sound.
• “

µ ” indicator blinks.

r While pushing [8 SET], rotate [R-DIAL] to select “BNAME”

or “MNAME” when programming the memory name or the
bank name, respectively.

• The item can also be selected by pushing [8 SET] several times.
• After selecting the memory or bank name programming condi-

tion, an under bar blinks for the first digit.

t Rotate [R-DIAL] to select the desired character.

• The selected character blinks.
• While pushing [6 M.N], rotate [R-DIAL] to select the character

group.

y While pushing [BAND], rotate [R-DIAL] to move the cur-

sor to left or right.

• Push [BAND] to move the cursor to right.

u Repeat steps t and y until the desired 8-character chan-

nel names are displayed.

i Push [MR S.MW] for 1 sec. to program the name and exit

the channel name programming condition.

• 3 beeps sound.

A to Z, 0 to 9, (, ), 

✱, +, –, ,, /, |, = and space.

NOTE:  One bank name can only be programmed into
each bank. Therefore, the previously programmed bank
name will be displayed when bank name indication is se-
lected. And also, the programmed bank name is assigned
for the other bank channels automatically.

FM

-

MNAME:

-

BANK

-

:C-11

012

µ

.

145.700

FM

>MNAME:Ric

>

BNAME:

>BNAME:GRO

-

BANK

-

:C-11

012

µ

.

145.700

FM

-

MNAME:

>BNAME:

-

BANK

-

:C-11

012

µ

.

145.700

FM

>MNAME:

>

BNAME:

-

BANK

-

:C-11

012

µ

.

145.700

FM

>

BANK

-

:C-11

012

µ

.

145.700