ICOM 269900 Manual De Usuario

MEMORY CHANNELS

■ Copying memory contents

This function transfers a memory channel’s contents to VFO
(or another memory channel). This is useful when searching
for signals around a memory channel frequency and for re-
calling the offset frequency, subaudible tone frequency etc.

D Memory

➪VFO

q Select the memory channel to be copied.

➥ Push [MR S.MW] to select memory mode, then rotate

[R-DIAL] to select the desired memory channel.

• Select the bank channel with [BAND] and [R-DIAL], if desired.

w Push [MR S.MW] for 1 sec. to select the select memory

write condition.

• 1 short and 1 long beep sound.
• “

µ ” indicator blinks.

e Push [VFO MHz] to select “VFO.”

• Rotate [R-DIAL] can also select “VFO.”

r Push [MR S.MW] for 1 sec. to write the selected channel

contents to VFO mode.

• Returns to VFO mode automatically.

Pushing [MR S.MW] for 2 sec. at the step w, can also be
copied the memory contents to VFO. In this case, the
steps e and r are not necessary.

D Memory

➪memory

q Select the memory channel to be copied.

➥ Push [MR S.MW] to select memory mode, then rotate [R-

DIAL] to select the desired memory channel.

w Push [MR S.MW] for 1 sec. to select the select memory

write condition.

• 1 short and 1 long beep sound.
• “

µ ” indicator blinks.

• Do not hold [MR S.MW] for more than 1 sec. otherwise the

memory contents will be copied to VFO.

e Rotate [R-DIAL] to select the target memory channel.
r Push [MR S.MW] for 1 sec. again to copy.

[EXAMPLE]: Copying channel 20 to 51.

√

MODE

ANL

AFC

TSQL

145 870

PSKIP

-DUP

TSQL

-DUP

020

√

MODE

ANL

AFC

TSQL

145 870

PSKIP

-DUP

051

CLEAR

SKIP

:OFF

MNAME:

-BNAME:

BANK

:----

020

145.870

CLEAR

SKIP

:OFF

MNAME:

-BNAME:

BANK

:----

051

----------------

Select memory
channel

Push for 1 sec.

Rotate

S.MW

Push for 1 sec.

S.MW