ICOM 316700 Manual De Usuario
113
12
MENU SCREEN OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
D Program scan link function
Sets the program scan link function ON and OFF
(default)
.
The link function provides continuous program scan in the
selected program scan number during program scan.
selected program scan number during program scan.
• Program scan link setting
q Rotate [DIAL] to select the program scan link channel, P0
q Rotate [DIAL] to select the program scan link channel, P0
to P9, that you want to change.
w Push [ ](MONI)* to enter program scan link setting.
e Rotate [DIAL] to select “ADD” to adding or “CLEAR” to
deleting from programmed scan link setting.
•
“LINK” for programmed scan linked number confirmation
(p. 000) and “NAME” for programmed scan link name setting
(p. 000) items also available.
(p. 000) and “NAME” for programmed scan link name setting
(p. 000) items also available.
r Push [ ](MONI)* then rotate [DIAL] to select the desired
programmed scan number to be linked
(if “ADD” is selected
in step
e)
or to be deleted from the link
(if “CLEAR” is se-
lected in step
e)
.
•
“ADD” selection;
The programmed scan numbers, that has not been linked in the
selected program link channel, are only be displayed/selected.
•
“CLEAR” selection;
The programmed scan numbers, that has been linked in the se-
lected program link channel, are only be displayed/selected.
•
Push
[
Ω] (CS) to cancel the selection.
t Push [ ](MONI)* to add/delete the setting.
• Return to the previous indication as step
e.
y Repeat steps e to t to continuing the program scan link
channel setting or push [MENU
] to exit MENU screen
operation.