ICOM 316700 Manual Do Utilizador

113

12

MENU SCREEN OPERATION

D Program scan link function 

Sets the program scan link function ON and OFF 

(default)

. 

The link function provides continuous program scan in the 
selected program scan number during program scan.

• Program scan link setting
q   Rotate [DIAL] to select the program scan link channel, P0 

to P9, that you want to change.

w Push [ ](MONI)* to enter program scan link setting.

e   Rotate [DIAL] to select “ADD” to adding or “CLEAR” to 

deleting from programmed scan link setting.

 • 

 

“LINK” for programmed scan linked number confirmation 
(p. 000) and “NAME” for programmed scan link name setting 
(p. 000) items also available.

r   Push [ ](MONI)* then rotate [DIAL] to select the desired 

programmed scan number to be linked 

(if “ADD” is selected 

in step 

e)

 or to be deleted from the link 

(if “CLEAR” is se-

lected in step 

e)

.

 • 

“ADD” selection; 

 

   The programmed scan numbers, that has not been linked in the 

selected program link channel, are only be displayed/selected.

 • 

“CLEAR” selection;

 

   The programmed scan numbers, that has been linked in the se-

lected program link channel, are only be displayed/selected.

 • 

Push 

Ω] (CS) to cancel the selection.

t Push [ ](MONI)* to add/delete the setting.

 

• Return to the previous indication as step 

e.

y   Repeat steps e to t to continuing the program scan link 

channel setting or push [MENU 

] to exit MENU screen 

operation.