ICOM 318200 Manual De Usuario

90

SET MODE

10

D 4HE

q  Push [MENU] one or more times to display the “M2” 

screen (Menu 2).

w  Push [TCN](F-4) to enter the Tone control Set 

mode.

e  Push a mode switch to select the desired operating 

mode.

r  Push [Y](F-1) or [Z](F-2) to select the desired 

item.

s

mode.

t Rotate [DIAL] to select the desired option.

s

s

ting, if desired.

y  Push [MENU] to save, and exit the Set mode.

Select the item Reset to the default 

setting

Mode switches

[

]

[MENU]

[F-3] [TCON]

[DIAL]

[

]

[

]

Ù

  1

Ú

S S B

[       –

 

–

 

–

 

]

 

–       –

 

–

 

–

TCON

R X   H P F ⁄ L P F

Displays the Set mode 
item name and number

Displays the option

First select the operating mode, then set the receive 
audio high-pass filter to between 100 Hz and 2000 Hz 
in 100 Hz steps.

./4% When the receive audio high-pass and low-
pass filters are active, “RX Bass” and “RX Treble” 
items will be reset to the default value.

First select the operating mode, then set the receive 
audio low-pass filter to between 500 Hz and 2400 Hz 
in 100 Hz steps.

./4% When the receive audio high-pass and low-
pass filters are active, “RX Bass” and “RX Treble” 
items will be reset to the default value.

First select the operating mode, then set the receive 
audio bass level to between –5 and +5.

First select the operating mode, then set the receive 
audio treble level to between –5 and +5.

First select the operating mode, then set the transmit 
audio bass level to between –5 and +5.

First select the operating mode, then set the transmit 
audio treble level to between –5 and +5.

Set the lower cut-off frequency of the transmission 
passband width for your wide setting to 100, 200, 300 
or 500 Hz.

Set the higher cut-off frequency of the transmission 
passband width for your wide setting to 2500, 2700, 
2800 or 2900 Hz.

Displays the selected 
operating mode

N