ICOM 325300 Manual De Usuario
4
2
PANEL DESCRIPTION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
rVOLUME CONTROL [VOL]
± Adjust audio volume level. (p. 16)
± During set mode operation, rotate to select the options.
± During set mode operation, rotate to select the options.
(p. 51)
tPTT SWITCH [PTT]
± Push and hold to transmit, release to receive. (p. 23)
For IC-T70E only
± Push briefly, then push and hold to transmit a 1750 Hz
For IC-T70E only
± Push briefly, then push and hold to transmit a 1750 Hz
tone burst. (p. 28)
yEXTERNAL DC IN JACK [DC IN]
± Connects the supplied wall charger, BC-167S, to charge
the attached battery pack, BP-264. (p. 12)
• The transceiver can charge only the Ni-MH battery pack, BP-
264. Charging the Li-Ion battery pack, BP-265 requires the
rapid charger, BC-193.
rapid charger, BC-193.
± Connect an external DC power supply through the op-
tional CP-12L, CP-19R or OPC-254L for external DC
operation. (p. 15)
operation. (p. 15)
D Keypad
± Push to input numeral for frequency input, memory chan-
nel selection.
± Push to send the DTMF code. (pp. 66, 67)
• [0]–[9] send “0”–“9,” [A](SET) sends “A,” [B](BAND) sends “B,”
[C](H/M/L) sends “C,” [D](V/M/C) sends “D,” [
1](DUP) sends
“
1
POWER KEY [
]
± Push and hold for 1 sec. to turn the transceiver
power ON or OFF. (p. 16)
VFO/MEMORY/CALL • SELECT MEMORY WRITE KEY
[V/M/C] • [S.MW](V/M/C)
[V/M/C] • [S.MW](V/M/C)
± Push to select the VFO mode, memory mode, call
channel mode or weather channel mode*. (pp. 18,
29, 30, 72)
29, 30, 72)
*Only for the U.S.A. version transceiver.
± Push and hold for 1 sec. to enter select memory
write mode. (p. 31)