ICOM 325300 Manuale Utente

4

2

PANEL DESCRIPTION

rVOLUME CONTROL [VOL]

± Adjust audio volume level. (p. 16)
± During set mode operation, rotate to select the options. 

(p. 51)

tPTT SWITCH [PTT]

± Push and hold to transmit, release to receive. (p. 23)
For IC-T70E only
± Push briefly, then push and hold to transmit a 1750 Hz 

tone burst. (p. 28)

yEXTERNAL DC IN JACK [DC IN]

± Connects the supplied wall charger, BC-167S, to charge 

the attached battery pack, BP-264. (p. 12)

• The transceiver can charge only the Ni-MH battery pack, BP-

264. Charging the Li-Ion battery pack, BP-265 requires the 
rapid charger, BC-193.

± Connect an external DC power supply through the op-

tional CP-12L, CP-19R or OPC-254L for external DC 
operation. (p. 15)

D Keypad

± Push to input numeral for frequency input, memory chan-

nel selection.

± Push to send the DTMF code. (pp. 66, 67) 

• [0]–[9] send “0”–“9,” [A](SET) sends “A,” [B](BAND) sends “B,” 

[C](H/M/L) sends “C,” [D](V/M/C) sends “D,” [

1](DUP) sends 

“

1

± Push and hold for 1 sec. to turn the transceiver 

power ON or OFF. (p. 16)

± Push to select the VFO mode, memory mode, call 

channel mode or weather channel mode*. (pp. 18, 
29, 30, 72) 

*Only for the U.S.A. version transceiver.

± Push and hold for 1 sec. to enter select memory 

write mode. (p. 31)