ICOM AP-3 Manual De Usuario

AP-3 SETTINGS

6-5 Testing the Operation (continued)

6. Start up the wireless terminal (in which a wireless LAN

card has been inserted). (

☞

6-3, p. 38).

• If the connection is normal, the

lamp

(

☞

p. 6) on the front panel will illuminate.

7. Make sure you can access the setting screen of the

AP-3 from the wireless terminal (

☞

p. 42).

8. Create a test folder and set the shared folder permis-

sion so that the folder can be shared.

9. Double click the [Network Computer] icon on both the

wired terminal and the wireless terminal. The wireless
access point is functioning properly if both computers
display an icon for the other computer.

* If using Windows 2000, [Network Computer] is called

[My Network].

10. From each computer (wired and wireless), double

click the icon for the other computer. The newly cre-
ated test folder should appear.

11. After completing these steps, refer to Chapter 8 and

set up the AP-3 so it can be used in the working net-
work. Then connect the AP-3 to the network.