ICOM AP-3 ユーザーズマニュアル
AP-3 SETTINGS
6
44
6-5 Testing the Operation (continued)
6. Start up the wireless terminal (in which a wireless LAN
card has been inserted). (
☞
6-3, p. 38).
• If the connection is normal, the
lamp
(
☞
p. 6) on the front panel will illuminate.
7. Make sure you can access the setting screen of the
AP-3 from the wireless terminal (
☞
p. 42).
8. Create a test folder and set the shared folder permis-
sion so that the folder can be shared.
9. Double click the [Network Computer] icon on both the
wired terminal and the wireless terminal. The wireless
access point is functioning properly if both computers
display an icon for the other computer.
access point is functioning properly if both computers
display an icon for the other computer.
* If using Windows 2000, [Network Computer] is called
[My Network].
10. From each computer (wired and wireless), double
click the icon for the other computer. The newly cre-
ated test folder should appear.
ated test folder should appear.
11. After completing these steps, refer to Chapter 8 and
set up the AP-3 so it can be used in the working net-
work. Then connect the AP-3 to the network.
work. Then connect the AP-3 to the network.