Nilfisk-advance Inc. ME401 Manual De Usuario
ME401-9
Nilfisk Advance ME401-9, Technical Manual v1.2, Marts 2014
Page 13
Installation of the ME401-9 in machinery
In this section possible installation proposals are given. The installation proposals are
listed as examples and can be used as a guide for inspiration for an actual installation.
Standard installation of ME401-9 for registering operating hours:
For a standard installation in machines where the unit should register the number of
operating hours etc. use the connections as described in the vehicle installation section.
Installing the ME401-9 as to surpass the main switch on the machine:
In case the main switch on the machine will break the negative wire (Ground wire), the
inputs may register a voltage level and start counting operating hours. To avoid this
situation the digital input 4 (Pink wire) should be connected to the chassis/ground on the
machine. Then send the following SMS to the unit (phone number) to activate the filtering:
Function
operating hours etc. use the connections as described in the vehicle installation section.
Installing the ME401-9 as to surpass the main switch on the machine:
In case the main switch on the machine will break the negative wire (Ground wire), the
inputs may register a voltage level and start counting operating hours. To avoid this
situation the digital input 4 (Pink wire) should be connected to the chassis/ground on the
machine. Then send the following SMS to the unit (phone number) to activate the filtering:
Function
Send SMS
Return-SMS from the unit
Activate filter function on inputs.
MT INFILT ON
MTC ACK (SERIAL No.) INFILT ON
NOTE:
Enabling the filtering function will disable the use of the alarm function on digital
input 4 as listed in the standard installation proposal above.
input 4 as listed in the standard installation proposal above.
NOTE:
It is recommended always to connect digital input 2 to the ignition signal of the
machine as this is necessary for km recording.
machine as this is necessary for km recording.
NOTE:
For the “Send SMS” it is of no importance if small or capital letters are used in
the command string, or a mixture hereof.
the command string, or a mixture hereof.