Kodak Alaris 305-PRINTER Manual De Usuario

Close the printing unit by pushing the right and left sides of the unit from the front 

with both hands.

When a new paper is loaded and the printing unit is closed with the power turned 

on, the paper will be automatically fed and cut.

When closing the printing unit, be careful not to get your hands caught 

between the printer and the printing unit. Otherwise, you may get injured.

•  When closing the printing unit, push it until a click is heard.

•  If the PAPER RIBBON indicator illuminates when the printing unit is closed, the 

print paper may have not been installed correctly.

  In this case, open the printing unit to make sure that the print paper has been 

installed correctly. Then close the printing unit again.

•  When the paper roll is reinstalled more than three times, the print paper may be 

used up earlier than the ribbon.

•  Make sure to replace the print paper and the ribbon simultaneously. A large 

amount of print paper may remain depending on the used condition.

•  Empty the trim tray frequently to prevent jamming the strips at the print outlet. 

Whenever you replace the paper and ribbon, make sure to throw away the 

paper strips in the trim tray.

•  Whenever you replace the print paper and the ribbon, clean the thermal head 

and the platen roller. For the cleaning procedures,