Kodak Alaris 305-PRINTER Manual De Usuario

  If, for some reason, printing is not possible or an error occurs during printing, the indicators on the front panel will   

illuminate or blink. In this case, follow the procedure described below.

 

: Steady on   : Off     : Blinking 

ALARM

PAPER RIBBON

POWER

Causes and Countermeasures

Page

(Orange)

This printer is in standby mode. 

Connect a USB cable to the printer when not 

connected.

It may take time that the printer is ready to print 

images after the image data is sent. 

 

(Green)

The printing unit is open.

•  Close the printing unit.

 

 

(Green)

A paper jam or a problem concerning the ribbon 

occurs.

•  Refer to “Overcoming paper jams.”

 

(Green)

The temperature of the thermal head is too high 

or too low.

•  Wait until the indication goes off. When the 

indicator stops blinking, the printer resumes 

printing automatically.

While the printer is working, do not open the door 

or turn off the power.

 

(Green)

The ribbon which is not available to this printer is 

installed.

•  Replace the ribbon with a new one.

The actual combination of ribbon and print paper 

is inconsistent with the setting made by the 

personal computer.

•  Open the printing unit and confirm that the 

actual combination of ribbon and print paper 

is consistent with the setting made by the 

personal computer. After checking, close the 

printing unit.

(Green)

The print paper or ribbon is not installed.

The print paper or ribbon is used up.

•  Install new print paper or ribbon.

(Green)

Other errors

  When the ALARM or the PAPER RIBBON indicator illuminates or blinks, open the door and carry out the above 

countermeasures.