Fibar Group S.A. FGDW002 Manual De Usuario

5

ADDInG/REMOVInG THE DEVICE

Adding (Inclusion) - Z-Wave device learning mode, allowing to add 

the device to existing Z-Wave network.
To add the device to the Z-Wave network:
1.  Close the cover.
2.  Place the Door/Window Sensor 2 within the direct range of your 

Z-Wave controller.

3.  Set the main controller in (Security/non-Security Mode) add mode 

(see the controller’s manual).

4.  Quickly, three times press one of the TMP buttons (while the other 

button is pressed).

5.  Wait for the adding process to end.
6.  Successful adding will be confirmed by the Z-Wave controller’s 

message.

Removing (Exclusion) - Z-Wave device learning mode, allowing to 

remove the device from existing Z-Wave network.
To remove the device from the Z-Wave network:
1.  Close the cover.
2.  Place the Door/Window Sensor 2 within the direct range of your 

Z-Wave controller.

3.  Set the main controller into remove mode (see the controller’s 

manual).

4.  Quickly, three times press one of the TMP buttons (while the other 

button is pressed).

5.  Wait for the removing process to end.
6.  Successful removing will be confirmed by the Z-Wave controller’s 

message.

Adding in Security 

Mode must be per-

formed up to 2 meters 

from the controller.

In case of problems 

with adding the de-

vice, please reset the 

device and repeat the 

adding procedure.

TMP 

button

TMP 

button