Fibar Group S.A. FGDW002 Manual De Usuario

7

OPERATInG THE DEVICE

Tamper (TMP) button: 
The Door/Window Sensor 2 is equipped with a tamper switch with 

two buttons. 
First TMP button is located inside the device, pressed by the closed 

cover and is used to detect openning it. 
Second TMP button is located at bottom of the device, pressed by the 

surface on which the device is mounted and is used to detect detach-

ing the device.
For the tamper switch to work one of the buttons must always be 

pressed! 
When one of the buttons is released, the tamper alarm will be send to 

the controller and associated devices. 
Additionally, tamper button allows to control the device directly.

TMP 

button

TMP 

button

Waking up the Door/Window Sensor 2: 
The Door/Window Sensor 2 needs to be woken up to receive informa-

tion about the new configuration from the controller, like parameters 

and associations.
To wake up the sensor manually, click one of the TMP buttons (while 

the other button is pressed).

controller: 
After adding the Sensor to the FIBARO System, it will be represented 

by two or three icons in Home Center interface. 
First icon informs about the status of magnetic sensor (open/close), 

second icon displays temperature measured by the built-in sensor. 

Third icon is assigned to high/low temperature alarm and is visible only 

if parameter 54 is not equal to 0.