GE Inspection Technologies LP 7260H Manual De Usuario

 – Tap the on-screen GE Logo (or press the 

 hard key) to open the  

Global Menu, then open the Setup Menu. 

 – Select to alter the system-specific settings shown here.  

– Drag your finger up or down the screen. This bar will move to show the current 

position among the list of system-specific settings. 

 – Tap to open the virtual keyboard and create or change a System Password. Once 

created, accessing the iQ’s operating sceens requires first entering the password. This 

password is for the entire system and is not associated with the active profile.

Note: Entering a password requires the 

 be active.  

 – Select and follow the on-screen prompts to restore the active 

 to the Factory 

Default Settings. 

A white balance corrects the color so that white appears white despite any slight hues 

that may exist under the lighting conditions present when performed.

 – Select New and follow the prompts to point probe at a white target or select Default 

to restore factory color settings.

A logo can be loaded onto the display screen provided it is PNG file type (with dimensions 

smaller than 140 x 140).

 – Select Load, then navigate the instrument or an external drive to select any PNG file 

type as the on-screen logo. 

 – Adjust Time and Date settings.

 – Select the Time Zone in which you are operating.