GE Inspection Technologies LP 7260H Manual De Usuario

A split screen displays two images side-by-side in any combination of live, frozen, or 

recalled. Since half-screen still images are cropped, dragging a finger across the display 

or moving the joystick allows you to pan side-to-side within the image.

 – Press at any time to launch the Split Screen feature. One half of the screen will initially 

show a live image, the other shows a frozen version of the image that appeared when 

Split Screen was selected. 

 – Each displayed image will be identified as either Live, Frozen (FF), or Recalled.

 – Select which image is active by touching either side of the split screen, or by selecting 

this soft key, or moving the joystick left or right. Only one image is active at a time, as 

indicated by the blue outline around the active image.

 – Change the magnification of the active image by zooming IN or OUT 

– Select to Recall a stored image into whichever side of the display is currently active 

 – Temporarily displays the active image as a full screen. This action DOES NOT cause 

the display to exit Split Screen mode. 

 – Measurement mode available for still images. This soft key is labeled with the most 

advanced measurement mode (3DPM, Stereo, or Comparison) available for the active 

still image. It allows measurement to be entered with the active image. Exiting from 

measurement will return to the current Split Screen view.